Rotary Hoe
Our rotary hoe models have dual in-line hydraulic motor drive to minimise wear to parts and are fitted with durable ½” blades. The levelling bar fitted to the front of the hoe also helps to level the soil.
When attached to a skid steer loader, the loader needs to be reversed over the area to be cultivated to ensure the tires do not run over the hoed ground.
The cutting depth is set in 50mm increments via the skid adjustment plates located on either side of the hoe.
78RH-12S
78RH-12S | |
---|---|
Required Flow/Pressure | 40–100lpm (138–241bar) |
Unit Width | 1500 |
Cut Width | 1250 |
Max Cut Depth | 150 |
78RH-15S
78RH-15S | |
---|---|
Required Flow/Pressure | 55–100lpm (138–241bar) |
Unit Width | 1800 |
Cut Width | 1500 |
Max Cut Depth | 150 |
78RH-15HS
78RH-15HS | |
---|---|
Required Flow/Pressure | 144lpm — High Flow (227bar) |
Unit Width | 1800 |
Cut Width | 1500 |
Max Cut Depth | 200 |
Find out more about our rotary hoe models
GET IN TOUCH