SCOUT MARK V

Experts in Scout Mark drill rigs

Our Scout Mark V drilling rigs are custom-built to suit the client’s vehicle and specific drilling requirements. Ideal chassis are a minimum of 13 tonnes GVM 4X4 trucks and tracked crawlers with at least 6.3 tonnes load capacity. The durable Hydrapower gearbox delivers slow running torque values of up to 2100Nm and the main winch pulls at 4200kg.
Recommended Base
(Minimum)
4 x 4 Truck with a 13 t GVM
and a 4.5 m wheelbase
Tracked Crawler with 6.3 t load capacity
Rig Engine 4 cylinder Cummins CPAK-4BTA3.9-C
turbo motor with 125 hp at 2200 rpm
Rig Hydraulics Sauer Danfoss porportionally
controlled control valves
Sauer closed loop pump on Rotary Drive
Sauer open loop pump on auxiliary functions
Rotary Drive Hydrapower Gearbox - Steel Casing
with floating hollow spindle and
hydraulic head lock and swing,
Two Speed, 0 - 150 rpm & 0 - 700 rpm
Low speed torque to 2100 Nm,
high speed torque to 474 Nm
Head Travel 5.1 m standard,
6.8 m optional
Main Winch Maximum pull is 4200 kg
Maximum line speed is 28 m/min
Wireline Winch (2) Two of in standard configuation
Maximum pull is 780 kg
Maximum line speed is 83 m/min
Pulldown Electrically controlled with
dial for speed control
Pull down capacity is 4400 kg
Pull out capacity is 6500 kg
Mast Fitted with 1.8 m mast dump for angle drilling
Standard length is 8.1 m, supplied with
hydraulically operated breakout spanner
Supplied with hydraulic circuit with quick-connect
couplings for optional breakout table
Braekout Table Optional fixed or split type table
Rod/Auger Guard Optional, can be fitted with hydraulic
lockout on head rotation
Tool Cabinet Optional
Rig Body Supplied with operator's platform,
(4) four stabilizer legs with burst
valve protection and fuel tank.
Rig body and mast painted in
Hydrapower Red and Black
Toolkit Flags for rear of mast, mast lock plates,
parts and maintenance manual for rig
and engine, and hydraulic pump test
point pressure gauges
Rig Models Trekker 2100
Scout 05

Call our sales team now on  07 3490 5100 to discuss your drill rig requirements.

Share by: