Specifications supplied on this page are standard options and may be subject to customization to meet client's needs.
|
Trekker 2100
|
| Recommended Base (Minimum) |
Choose from Crawler Tracks, 3T Truck or none at all
|
| Rig Engine |
4 cylinder Cummins A2300T turbo motor with 60 hp at 2800 rpm |
| Rig Hydraulics |
Sauer Danfoss porportionally controlled control valves
Sauer closed loop pump on Rotary Drive Sauer open loop pump on auxiliary functions
|
| Rotary Drive |
Hydrapower Gearbox - Steel Casing with floating hollow spindle and hydraulic head slide
Two Speed, 0 - 150 rpm & 0 - 700 rpm
Low speed torque to 2100 Nm, high speed torque to 474 Nm
|
Head Travel
|
2.1 m standard
|
| Main Winch |
Maximum pull is 2500 kg
Maximum line speed is 28 m/min
|
|
Wireline Winch
|
1 Off, Maximum pull is 780 kg
Maximum line speed is 83 m/min
|
|
Pulldown
|
Pull down capacity is 3100 kg
Pull out capacity is 4400 kg
|
|
Mast
|
Fitted with 1.8 m mast dump for angle drilling
Standard length is 3.2 m
|
| Braekout Table |
Optional fixed or split type table
|
Rod/Auger Guard
|
Optional, can be fitted with hydraulic lockout on head rotation
|
| Tool Cabinet |
Optional
|
|
Rig Body
|
Supplied with operator's platform, (4) four stabilizer legs with burst valve protection and fuel tank. Rig body and mast painted in Hydrapower Red and Black
|
|
Toolkit
|
Flags for rear of mast, mast lock plates, parts and maintenance manual for rig and engine, and hydraulic pump test point pressure gauges
|
|
Rig Models
|
Trekker 2100
|
In keeping with our policy of continual improvement, Hydrapower reservse the right to alter the specification, design or range of our products without prior notification.