Specifications supplied on this page are standard options and may be subject to customization to meet client's needs.
|
Explorer 500
|
| Recommended Base (Minimum) |
4 x 6 Truck with 24 t GVM bogie drive with diff-lock and cross lock |
| Rig Engine |
6 cylinder Cummins CPAK-6BTA turbo after cooled with 176 hp at 2500 rpm |
| Rig Hydraulics |
Sauer Danfoss porportionally controlled control valves
Sauer closed loop pump on Rotary Drive Sauer open loop pump on auxiliary functions
|
| Rotary Drive |
Hydrapower Gearbox - Steel Casing with floating hollow spindle and hydraulic head lock and swing
Two Speed, 0 - 225 rpm & 0 - 966 rpm
Low speed torque to 4150 Nm, high speed torque to 966 Nm
|
Head Travel
|
6.8 m
|
| Main Winch |
Maximum pull is 4200 kg
Maximum line speed is 28 m/min
|
|
Wireline Winch
|
(1) One of in standard configuration
Maximum pull is 780 kg
Maximum line speed is 83 m/min
|
|
Pulldown
|
Electrically controlled with dial for speed control
Pull down capacity is 7000 kg
Pull out capacity is 11 500 kg
|
|
Mast
|
Fitted with 2.0 m mast dump for angle drilling
Standard length is 10 m, supplied with hydraulically operated breakout spanner and top pulley swivel
Supplied with hydraulic circuti with quick-connect couplings for optional breakout table
|
| Brakeout Table |
Optional split type table |
Rod/Auger Guard
|
Optional, can be fitted with hydraulic lockout on head rotation
|
Optional
|
|
Rig Body
|
Supplied with operator's platform and offsider's platform, (4) four stabilizer legs with burst valve protection and fuel tank. Rig body and mast painted in Hydrapower Red and Black
|
|
Toolkit
|
Flags for rear of mast, mast lock plates, parts and maintenance manual for rig and engine, and hydraulic pump test point pressure gauges
|
|
Rig Models
|
Explorer 500
|
In keeping with our policy of continual improvement, Hydrapower reservse the right to alter the specification, design or range of our products without prior notification.